The Original Audi Lightweight Rotors engineered and manufactured in the USA since 2010!

Click to enlarge picture
Audi S8 Brake Rotors (Rear) | 2-piece Lightweight

Audi S8 Brake Rotors (Rear) | 2-piece Lightweight

Due to popular demand, all of our 2-piece, lightweight rotors will now come with black anodized rotor hats featuring Type 3, hard anodizing, the highest quality and hardest anodizing available for aluminum. This will make the rotor hats more resistant to fade and wear and will hide brake dust better. Due to popular demand all lightweight rotor rings will also feature zinc plating. This high quality coating will slow the effects of corrosion and keep your rotor rings looking good through the winters.

These rotors shave 14.5 lbs of unsprung weight from the front of your car while increasing braking performance, plus they bolt on just like stock! This is great alternative to a full on Big Brake Kit since the stock B8-S4 and S5 rotor is already a stout 345mm (13.6") and most may not want to spend $2,000 plus for a full Big Brake Kit. We basically brought the same high performance great cooling designed rotor to these drop in (fit like stock) front rotors and at a 1/4 of the price or less of a full Big Brake Kit.

Stock vs. JHM
-Rotor Weight: Stock = 23lbs(each), JHM = 15.75lbs(each) - 31% LIGHTER, 7.25lbs less each
-Rotor Cooling Air-gap: Stock = 11.5mm(.450"), JHM = 18.5mm(.728") - LARGER for better cooling
-Rotor Cooling Center Fin Design: Stock = One Direction Airfoil (one side pumps the air from the inside out and the other side pumps the air from the outside in), JHM = Airfoil (side specific rotors that both pump the air from the inside out) - EQUAL EFFICIENCY for equal cooling
-Rotor OD: Stock = 345mm(13.6"), JHM = 345mm(13.6") - SAME
-Rotor Thickness: Stock = 30mm(1.18"), JHM = 30mm(1.18") - SAME
-Bolt pattern: - SAME (fits like an OEM rotor would)

INCLUDES: 2 - JHM 2-piece Lightweight Front Rotors. (Each rotor weighs 7.25lbs less than stock for a total of almost 14.5lbs weight savings.) 31% lighter!

Outer ring specs:
We worked closely with a race brake manufacturer that supplies many NASCAR racers and a couple major brake kit companies. Due to their expertise we chose to have them build us the outer rings to our specs to fit the B8 S4 and S5. The rings feature 12 attachment points for durability and strength.

Center hat specs:
We CNC machine the Aluminum center hats in house based on their recommended materials and thicknesses for durability. 12 attachment points for durability and strength. We also engrave JHM in them in 3 locations equal from each other, it looks clean and doesn't jump out or look tacky.

Click to enlarge picture
Audi B8 S4-S5 Brake Rotors (Rear) 2-piece Lightweight

Audi B8 S4-S5 Brake Rotors (Rear) 2-piece Lightweight

NOTE: With the installs we have done we have found that our slot design is whisper quiet.
Click to enlarge picture
Audi B8 S4-S5 Brake Rotors (Front) 2-piece Lightweight

Audi B8 S4-S5 Brake Rotors (Front) 2-piece Lightweight

NOTE: Due to differing scale calibrations our estimates on our rotors are slightly high.

Please note: JH Motorsports does not recommend using EBC brake pads with our 2-piece lightweight rotors. Customer have reported and we have found EBC pads leave excessive pad deposits that can cause brake pulsation. Many EBC pads have a break in coating that reacts with the zinc plating used on our rotors

For shipping quotes: Please sign in or join then put the items you want in your shopping cart and proceed to checkout.

This product fits the following vehicles:

Make	Model	Chassis	Engine
Audi	S5	B8-B8.5 (2008-2017)	all
Audi	S4	B8-B8.5 (2010-2016)	3.0t V6 24v SC

B8/B8.5 S4/S5 3.0TFSI

MercRacing MRA1900 3.0TFSI Supercharger

El Doc 3.0T Dual LPFP Upgrade

El Doc 3.0T Single LPFP upgrade

Milltek B8 S4 Catback Exhaust

Milltek B8.5 S4/S5 Catback Exhaust

DL501 DSG Service kit (Gen 2)

JHM 2-piece Lightweight Front Brake Rotors for B8/B8.5 S4-S5 (Pair)